device tree

All about the Raspberry Pi SBC and Rpi projects,hints, etc.

device tree

Postby Richard-TX » Sat Feb 07, 2015 12:03 am

you will need to add some new settings to your config.txt:

# Uncomment some or all of these to enable the optional hardware interfaces
#device_tree_param=i2c1=on
#device_tree_param=i2s=on
#device_tree_param=spi=on

# Uncomment one of these lines to enable an audio interface
#device_tree_overlay=hifiberry-dac
#device_tree_overlay=hifiberry-dacplus
#device_tree_overlay=hifiberry-digi
#device_tree_overlay=iqaudio-dac
#device_tree_overlay=iqaudio-dacplus

# Uncomment this to enable the lirc-rpi module
#device_tree_overlay=lirc-rpi

# Uncomment this to override the defaults for the lirc-rpi module
#device_tree_param=gpio_out_pin=16
#device_tree_param=gpio_in_pin=17
#device_tree_param=gpio_in_pull=down
User avatar
Richard-TX
Site Admin
 
Posts: 208
Images: 6
Joined: Sat Feb 04, 2012 8:10 pm

Return to Raspberry Pi

Who is online

Users browsing this forum: No registered users and 1 guest

cron